Fenner Gearboxes - Tel: 01274 730340 Fenner Power Plus shaft mounted speed reducers. New design with a 50% increase in power to weight ratio. Fenner shaft mounted speed reducers available in ratio's - 5/1, 13/1, 20/1, 25/1 ratio. Anti-runbackdevise can be fitted to these units. Reducing bushes available. Supplied with a torque arm for easy mounting. Fenner 'M' Series Geared motors. Inline Geared motors and speed reducers. Input power upto 90Kw and output torque upto 11,000Nm. Gear ratio's from 8/1 to 16,200/1 (combination units). The Fenner geared motors are suitable for IEC fitting motors and can be supplied to ATEX standards if required. Fenner 'C' Series Geared motors. Right angle Helical/Worm geared motors. 8 sizes with an input power up to 45Kw and an output torque of 10,000Nm. Gear ratio's up to 250/1 for a double reduction & up to 60,000/1 for a combination unit. Available with feet, output shaft/flange and torque arm. Fenner 'F' Series Parallel Helical Geared motor. Shaft mounted gearbox. 11 sizes available with an input power up to 11 Kw. Output torque up to 100/1 for a double reduction & 5,600/1 for a combination unit. Suitable for IEC motors. Fenner 'K' series Geared motors. Helical Bevel right angle units. 9 sizes with an input power up to 90Kw and an output torque up to 12,3000Nm. Gear ratios up to 160/1 (triple reduction) and 10,000/1 (five stage). Available with feet, output shaft/flange & torque arm. Suitable for IEC motors. For further information on Fenner Gearboxes or for any Fenner Gearbox information, please call us on: Telephone: 01274 730340 Facsimilie: 01274 308080 Email: info@parker-eng.co.uk